List of graduation projects for semester 20241:
| Topic | Supervisor | Proposal |
|---|---|---|
|
Smart Irrigation System using IoT and Sensor Networks |
Dr. Emad Saeid | |
|
Design and Implementation of a Smart Aquatic Drone for Environment Monitoring |
Dr. Slim ABID | |
|
Design of mini battery charger based on Stirling engine |
Dr. Houssem BEN ARIBIA | |
|
Optimal Allocation of Renewable Energy Sources as DGs in Distribution Network |
Dr. Ehab Salim | |
|
Harnessing Sustainable Energy from Organic Waste: Waste-to-Electricity |
Dr. Shahir Hussein | |
|
IoT-Based Energy Monitoring and Management System for Smart Grids |
Dr. Ghazi BEN HMIDA | |
|
Multimodal biometric recognition system for people with special needs |
Dr. Sabeur MASMOUDI |
List of graduation projects for semester 20233:
| Topic | Supervisor | Proposal |
|---|---|---|
|
Design and Implementation of a Smart Irrigation System using the Internet of Things (IoT) |
Dr. Idris H. Smaili | |
|
Smart Irrigation System using IoT and Sensor Networks |
Dr. Idris H. Smaili | |
|
Remote real-time monitoring system for oil and gas well based on IoT |
Dr. Ghazi BEN HMIDA | |
|
Design and implementation of smart vehicle based on biometric recognition |
Dr. Sabeur MASMOUDI | |
|
Electrical Distribution Systems for Building in Faculty of ART |
Dr. Atef Aly Mohamed Elemary | |
|
Design and Analysis the Models of Speed Control System for the Different Types DC Electrical Motors |
Dr. Ahmed Said Mohamed Oshaba | |
|
Design And Improvement of Substation Grounding Grid |
Dr. Ghareeb Moustafa |
List of graduation projects for semester 20232:
| Topic | Supervisor | Proposal |
|---|---|---|
|
DC House Modeling and System Design |
Dr. Slim ABID | |
|
Design and Implementation of a Smart Energy Meter Using Global System for Mobile Communication (GSM) |
Dr. Idris H. Smaili | |
|
Design and Implementation of Smart Irrigation System Based on the IoT |
Dr. Ghazi BEN HMIDA | |
|
Development of an environment surveillance system based on IoT |
Dr. Shahir Hussein | |
|
Design the Models of Speed Control System for the Different Types DC Electrical Machines and |
Dr. Ahmed Said Mohamed Oshaba | |
|
Designing a New MIMOOFDM based Power Line Communications for Smart Grid |
Dr. Emad Saeid | |
|
Design And Improvement of Substation Grounding Grid |
Dr. Ghareeb Moustafa | |
|
Optimal Design of Induction Motor and Parameters Identification Using Only No-load Test Measurement |
Dr. Ferchichi Noureddine |
List of graduation projects for semester 20222:
| Topic | Supervisor | Proposal |
|---|---|---|
|
Design, Simulation, and Implementation of Buck-Boost DC-DC Converter Based on IGBT Modules. |
Dr. Slim ABID | |
|
Design and Simulation of a Bidirectional DC-DC Converter for V2G |
Dr. Slim ABID | |
|
Solar and Smart Energy System |
Dr. Idris H. Smaili | |
|
Design and Implementation of a Smart Energy Meter and Monitoring System using the Internet of Things (IoT) |
Dr. Ghazi BEN HMIDA | |
|
Design the Models of the Different Types DC Electrical Machines and Speed Control Systems and Compare Between Them |
Dr. Ahmed Said Mohamed Oshaba |
List of Graduation Projects for Semester 20221(CONTINUOUS PROJECT):
| Id | Topic | Supervisor |
|---|---|---|
| 1 | Design of Wind Turbine Data Monitoring based on Arduino and LabView |
Dr. Houssem BEN ARIBIA |
| 2 | Health Monitoring System for Elderly People Based on Internet of Things |
Dr. Ghazi BEN HMIDA |
| 3 | Smart control of elevator for special needs |
Dr. Sabeur MASMOUDI |
| 4 | Optimization of some electro-mechanical parameters of a wind turbine | Dr. Ferchichi Noureddine |
| 5 | Designing and Modeling of Sliding Mode Control for Interior-Mounted Permanent Magnet Synchronous Machine |
Dr. Hashim Al-naimi
|
| 6 | Design and Simulation of Speed Control of dc Motor | Dr. Mohamed Moustafa |
| 7 | Proposed 380 KV Transmission Line Design | Dr. Atef Aly Mohamed Elemary |
| 8 | Adaptive Speed Control for the Different DC Electrical Machines | Dr. Ahmed Said Mohamed Oshaba |
| 9 | Optimal Location and Sizing of Capacitor in Radial Distribution System | Dr. Ehab Salim |
| 10 | Maximum Energy Efficiency monitoring for Wireless Power Transfer Systems | Dr. Shahir Hussein |
| 11 | Economic dispatch | Dr. Sultan Hakami |
| 11 projects | 11 staff members |
List of Graduation Projects for Semester 20212 (CONTINUOUS PROJECT):
| Id | Topic | Supervisor |
|---|---|---|
| 1 | Design the Speed Control and Comparison Between the Different Types of DC Electrical Machines |
Dr. Ahmed Said Mohamed Oshaba |
| 2 | Design of Speed Control of dc Motor using Step Down Converter |
Dr. Mohamed Moustafa |
| 3 | Optimization of sensor implementation characterization measurement of electrical parameters and experiment design | Dr. Emad Saeid |
| 4 | Development of a Weather monitoring system using a Microcontroller | Dr. Ghazi BEN HMIDA |
| 5 | Design and implementation of Pico Hydro – Solar Photovoltaic Hybrid System | Dr. Slim ABID |
| 6 | Design and Simulation of Boost Converter Using P & O Technique for PV System | Dr. Slim ABID |
List of Graduation Projects for Semester 20212 (Completed Graduation Projects):
| Id | Topic | Supervisor |
|---|---|---|
| 1 |
Comparison between the Different Types of DC Electrical Machines and Adaptive Speed Control for This Machines |
Dr. Ahmed Said Mohamed Oshaba |
| 2 |
Design and Simulation of Speed Control of dc Motor over a wide range |
Dr. Mohamed Moustafa |
| 3 |
Design of a Footstep Power Generation model |
Dr. Shaban El-Adl |
| 4 |
Design of Solar Panel Data Monitoring based on Arduino and LabView |
Dr. Houssem BEN ARIBIA |
| 4 projects | 4 staff members |